Ericsson Mobile A1018s Specifications

GSM-21T GSM communicator for Ericsson A1018 Hook up, Installation and Programming Manual Doc. 10112/au

10 3x Burglary Alarm on zone x 4x Medical emergency Medical emergency 5x Tamper Ambush 6x Bypassed zone

11 - press key “Yes”. 5. in this case, a configuration SMS will be created, having the next structure: - the phone number of the monitoring station

12 - , (comma) - code generated by activation (ground connecting) of the sixth communicator input (2 HEX digits) - , (comma) - code generated by dea

13 Any change of the configuration SMS is accompanied by a restart of the GSM module. Note: Format DTMF 4x2 describes events in such a manner that n

14 - press „NO” to exit the submenu. 7. Exit the mobile phone programming menu; Example for Ericsson A1018s: Press key „NO” for several times until

2 Table of contents GENERAL FEATURES…………………………………………….3 Applications of the GSM-21T communicator ... 3 Functions of G

3 GENERAL FEATURES GSM-21T is a GSM communicator mounted in a metallic case. Inside the case there is a 220Vac transformer, a back-up battery, and a

4 SMS format – example: “for the objective with code 0261, an alarm was detected on zone 2, disarm by code 1.”) The next image describes functions o

5 - it transmits events occurred at the objective protected by the burglary control panel only as SMS messages to the mobile phone of the objective’

6 Note: The GSM phone connected to the GSM module is loaded from the module. GSM network specifications - can be used in any GSM authorized network

7 - 16VAC: must be connected to the secondary winding of the power transformer; - LINE: must be connected to the phone dose; - TRBL: output; it goes

8 Connection Scheme for GSM-21T GSM-21T programming Note: Before programming the GSM module, program the burglary control panel to phone line tran

9 - code generated for the periodical test. Notes: 1. SMS messages are implicit and automatically generated. Message issuing is not allowed in this